Home › Contact › Request Form

Request Form

Request

Contact

Company:
Responsible:
Phone:
E-Mail*:
Fax:
Street:
ZIP:
City:

Plant

Plant:
Project, e.g. Project-no.:
Name of machine (operator) + TAC:
Type of the machine (manufacturer):

Identical build and equipped machines

Please fill out one data sheet per machine.
In case of identical build and equipped machines please name the quantity.:

Data of compressor / pump (to be monitored)

Medium (e. g. H2, natural gas...):
Machine power in hp / kW:
Construction (horizontally, vertically,...):
Machine speed in rpm:
No. of cylinders (total):
No. double acting cylinders:
No. single acting cylinders:
No. of stages:
Max. temperature of media ( °C or °F ):
Max. discharge pressure each stage (psi):

Data, Drive (for engines to be monitored)

Type of drive, media (E-, diesel, natural gas, .....):
Drive power in hp / kW:
Construction (Boxer, V, Integral,..):
Drive speed in rpm:
No. of cylinder:
2 stroke / 4 stroke:
Max. ignition pressure (PSI):
Max. combustion temp. (°C or °F):

DCS-Connection

Digital DCS connection y/n:
If yes; which type of system:
No. of DCS values (appr.):
Analogous DCS conection y/n:
If yes; which type of signal (4-20 mA, 0-10 V....):
No. of analogous DCS values (appr.):

Existing Sensors, Probes

No. of installed acceleration probes (vibration):
If installed: type of probe and signal:
No. of installed pressure transmitter ( for p-V diagram ):
If installed: type of transm. and signal:
No. of installed (drilled) indication bores:
If installed: Type of indicator valve:
No. of installed rod-drop proximitor probes:
If installed: type of probe and signal:
No. of installed trigger proximitor probes:
If installed: type of probe and signal:
Please pay attention! All existing signals wired to the PROGNOST®-NT System have to be ex- and galvanic separated. There is no intermediate processing permitted!

PROGNOST®-NT Options - please mark if wanted

Safety Analyses (High speed monitoring of thresholds; vibration)
Early Failure Detection (crank angle related vibration analysis)
Performance Optimization (p-V diagram analysis)
Wear Monitoring (rod-drop, temperatures, ...)
Process Data Analyses (multistage monitoring)
Lubrication Monitoring
Component Tracking / Asset Control
Planned quantity of workstations for the PROGNOST®-NT Visualization

Which goals should PROGNOST match?

Security Code

* Confirm Security Code: